Why Does My Bissell Crosswave Smell Musty?

why does my bissell crosswave smell musty

It could be a number of things, but the most common causes are clogged filters and musty smells caused by mold or mildew that is growing on the machine. This article will give you tips for preventing future musty smells as well as some great methods for fixing your Bissell Crosswave.

If your Bissell Crosswave smells musty then follow this article below on how to clean it out and why your Bissell Crosswave smells musty.

Why Does My Bissell Crosswave Smell Musty?

If your Bissell CrossWave smells musty, it might be because you’re not emptying the contents of the dirty water tank often enough. As dirty water gets pushed through the filter, it will become gross and stinky. Make sure you do not let the dirty water level surpass the full line and clean the filter frequently to prevent Bissell CrossWave from smelling.

Possible causes for your Bissell CrossWave smelling burnt are overloading clogged filters and an overheating motor.

Cleaning the machine regularly is important to avoid unpleasant odors. Clogged filters can cause the Bissell to release an odor.

Water drains from a machine need to be properly prepared before it’s cleaned out, or else a smell will eventually build up inside of the machine. A blocked hose, dirty filter, or overheated motor can cause the Bissell carpet cleaner to smell musty.

How to Get the Musty Smell out Of Bissell CrossWave?

1. Always Clean the dirty water tank thoroughly after use

It is important to clean the dirty water tank after each use in order to maintain your Bissell CrossWave. If you don’t, the machine can start to smell over time. The tank should be emptied and cleaned out, then the filter should be rinsed and allowed to dry. Make sure that everything is completely dry before putting it back together.

2. Clean the Bissell CrossWave filter or replace it with a new one

The filter should be washed with warm water and rinsed. The dirty water tank must also be washed, but the filter can be hand-washed to clean it.

Before reassembling, make sure everything is dry and not wet. The filter is easy to buy right here on Amazon. Replace the filter every 6 months, or when it becomes dirty and doesn’t wash clean.

3. Cleaning your Bissell CrossWave brush roll is important

In order to clean your Bissell CrossWave brush roll, you will need to unplug the machine from the outlet and remove both the dirty water tank and the debris bin. Rinse each one of these items under warm water, then use a damp cloth to wipe down the machine. Be sure to dump out the dirty water in order to clean your machine properly.

The brush roll should be cleaned after every 3-6 months for optimal performance. To clean it, rinse it under warm water and let it dry before reassembling the machine. If the brush roll has become too dirty, replace it with a new one.

4. Use vinegar as a natural deodorizer for cleaning your Bissell CrossWave

If your Bissell CrossWave starts to smell musty, don’t worry – you can fix it! One natural way to deodorize and clean your machine is with vinegar. White vinegar can kill mold and mildew, which may be causing the smell.

To use vinegar as a deodorizer:

1. Run white vinegar through the tank compartment or directly into the water tank to remove any mildew within the machine components.

2. For the musty smell, use vinegar and allow both to dry.

3. Once everything is completely dry, run your Bissell CrossWave on its highest setting for at least five minutes. This will help get rid of any lingering smells.

4. If you’re still having trouble getting rid of the odor, try using a 50/50 mixture of white vinegar and water in a spray bottle and spraying down all visible surfaces inside the machine chamber – including where the dirty water goes – then let it sit for about 30 minutes before wiping it up with a cloth or paper towel.

5. Finally, if you have access to them, consider soaking some pads in white vinegar overnight and placing them inside your machine’s recovery tanks.

How do I clean my Bissell CrossWave brush?

The Bissell CrossWave has a front window and a brush roll which can get dirty. It is important to clean both the water tank and filter after cleaning out the dirty water tank. After cleaning out the dirty water tank, it is important to clean out the brush roll thoroughly before reassembling it back into your machine.

The Bissell Crosswave is easy to clean. To replace the brush roll, you must remove the brush cover at the bottom of the vacuum unit. A small brush can be used to clean a Bissell CrossWave. Pour clean water over your hardwood floor and vacuum cleaner in hard-surface mode.

Can you wash the CrossWave filter?

Yes, you can wash the CrossWave filter. First, run warm water over it and through it to clean it. Then, ensure that you also clean out the small compartment that houses the filter. This will help prevent mold from accumulating. Finally, do not vacuum when the filter is full of dirt or dampness, as this can cause mold growth inside the vacuum cleaner.

Do you have to clean Bissell CrossWave after every use?

If you’re using your Bissell Crosswave on a regular basis, then it’s probably a good idea to clean it after every use. However, if you’re only using it sporadically, then you may not need to clean it after every time. The underside of the Crosswave will get quite dirty if it is used for wet spills that are wider than the vacuum itself.

The Bissell Crosswave has a clogged brush after every use. This can be caused by dirt, hair, and other debris getting caught in the bristles. To prevent this from happening, make sure to clean the brush regularly with an approved Bissell cleaning solution. Only certain Bissell cleaning solutions are compatible with the Crosswave as it cleans your floor.

Bissell CrossWave warranty can be voided if cleaning is done with an unapproved cleaner. So make sure to stick with approved cleaners – such as Bissell’s own cleaner or another one that’s been approved by the company, to avoid any problems down the road.

Leave a Reply

Your email address will not be published. Required fields are marked *